SG-090-P TopAir Carbon Filtration Cyanocrylate Fuming Chamber
TopAir’s Cyanoacrylate Fuming Chamber is used to develop latent prints from non-porous surfaces in a safe, controlled environment. Cyanoacrylate is placed inside the chamber while evidence is easily positioned using the adjustable hanging rods. Starting the cycle triggers the automated system to control the hotplate, humidity, door lock, internal circulation fan and purge cycle.
Its recirculatory design enables the system to operate and setup with no ducting required.
The cyanoacrylate vapors are filtered by a carbon filter. This ensures that no dangerous substances are exhausted in to the atmosphere surrounding the laboratory. Its ductless construction also allows the unit to be easily moved and transported.
Programmable Electronic Control
The electronic control system includes easy on-screen functions to program Purge Cycle, Contact
Time and RH Sensor.
Main and Pre Filters are supplied as standard with all chambers and are
listed here for replacement purposes.
* Prefilters are supplied as standard with all units. Efficiencies are over
99.6%. The filters remove particles from the airstream before it flows
through the Main Filter.
** Filters must be changed on a regular basis to maintain chamber
efficiency.
81
On/Off for
Main power
Light
Automatic cycle
A
Operation Process
• Evidence is placed within the chamber and cyanoacrylate is placed on the hotplate.
• Door is closed and start button is pushed. Door locks automatically.
• Evidence is placed within the chamber.
• Humidifier is activated, increases humidity and releases vapors composed of 60%-80% humidity and fumes
into the chamber.
• Fuming continues for a half-hour cycle.
• Once the cycle has completed, the evidence can be examined
• Airflow (m3/hr) 250
• Weight is 270 lbs.
• Dimensions: 900 x 750 x 1550 mm 34.5" x 29.5" x 61”
Any questions call 714-979-1405 or email us at Sales@HittMarking.com